| Customization: | Available |
|---|---|
| After-sales Service: | 24/7 |
| Warranty: | 12 Months |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Basic introduction:
1. Scope of application: The hose for Well control GNG High Pressure/ Fire Resistant and Heat Insulation Hose assembly is mainly used for the hydraulic Control of the BOP for drilling and for Hydraulic transmission at high temperature and Flammable places in the metallurgic industry.
2. Product classification: High Molecular Polymer Jacket Type, Stainless Steel Armored Jacket Type and Braided Stainless Steel wire Jacket Type.
3. Applicable Standard: API Spec 16 D SY/T5053.2-2007
5,000psi W.P. - 10,000 psi Test-15,000 Minimum Burst
Certification/Standards:
API Spec 16D--ISO 14693
Recommended For:
Blow-out preventer (BOP) systems requiring high pressure, high temperature and flame resistant control lines certified to API 16D.
Armored hose assemblies with flame resistant cover withstand minimum 1300°F (+700°C) flame temperature at working pressure for 5 minutes without failure.
Tube: Modified Nitrile. Black.
Reinforcement:
Multiple layers of textile fabric and steel cable, with one layer middle rubber placed between cable layers.
Cover:
Fire resistant, rubber cover, stainless steel armored to handle abrasion, corrosion, cutting, gouging, oil and weather.
Couplings:
Crimped couplings with over-ferrule fire protection.
Temperature:
-40°F to +212°F (-40°C to +100°C) continuous service.
Options:
Accessories such as API 16D quick connector, self-sealing union and exterior armor to protect hoses against extreme environmental damage are available upon request.
|
in. mmI.D |
MPa W.P |
MPa T.P |
mm Min Bending Radius |
in Coupling Thread |
|---|---|---|---|---|
| 3/4 19 | 14 | 21 | 240 | NPT1,R1 |
| 3/4 19 | 21 | 31.5 | 240 | NPT1,R1 |
| 3/4 19 | 35 | 52.5 | 280 | NPT1,R1 |
| 3/4 19 | 45 | 67.5 | 280 | NPT1,R1 |
| 1 25 | 14 | 21 | 300 | NPT1,R1 |
| 1 25 | 21 | 31.5 | 300 | NPT1,R1 |
| 1 25 | 35 | 52.5 | 360 | NPT1,R1 |
| 1 25 | 45 | 67.5 | 360 | NPT1,R1 |
){kind=link}